OM SYSTEM OM-1 Mirrorless Camera - Manual (Page 181)

181 EN
Shooting Settings
4
Adjusting the headphone volume (Headphone Volume)
PA S M B
n
Menu
MENU n n n
5. Sound Recording/Connection
n
Headphone
Volume
Headphone Volume Adjust the volume of audio output to the headphones.
Time Codes (Time Code Settings)
PA S M B
n
Adjust time code settings. Time codes are used to synchronize picture and sound
during editing and the like. Choose from the following options.
Menu
MENU n n n
5. Sound Recording/Connection
n
Time Code
Settings
Time Code Mode
Choose a time code recording option. Use time codes where precise
timing is required.
[Drop Frame]
: Drop-frame time codes. The time code is adjusted to
compensate for deviations from the recording time.
[Non-DF]
: Non-drop-frame time codes. The time code is not
adjusted to compensate for deviations from the recording
time.
Count Up
Choose how the time count is incremented.
[Rec Run]
: The count is incremented only during recording.
[Free Run]
: The count is incremented continuously, including when
recording is not in progress or the camera is off.
Starting Time
Choose the starting time code.
[Reset]
: Reset the time code to 00:00:00
[Manual Input]
: Enter the time code manually.
[Current Time]
: Set the time code to the current time, frame 00.
#
When setting [Starting Time] to [Current Time], be sure that the camera shows the correct
time.
g
“Setting the Camera Clock (
X
Settings)” (P. 257)
#
Time codes are not recorded on high-speed movies (P. 142).