OM SYSTEM OM-1 Mirrorless Camera - Manual (Page 112)

112 EN
Shooting Settings
4
Setting metering options for sequential shooting
(Metering during
j
)
PA S M B
n
Menu
MENU n _ n
5. Metering
n
Metering during
j
No
The camera meters exposure when capturing the first frame and
exposure is locked during sequential shooting.
Yes
The camera meters brightness and determines exposure for each
frame.
#
If exposure is locked by pressing the
AEL
button (P. 109) or pressing the shutter button
halfway (P. 111), exposure remains locked during sequential shooting even when
[Metering during
j
] is set to [Yes].
#
When [
♥ j
SH1] or [ProCap SH1] is set, [Metering during
j ] is fixed at [No].
Metering the Focus Target (
N
Spot Metering)
PA S M B
n
Choose whether the camera meters the current AF target when [
C
] is selected for
[Metering]. Settings can be adjusted separately for spot, spot highlight, and spot
shadow metering.
Menu
MENU n _ n
5. Metering
n N Spot Metering
1 Select a metering method with which you want the camera to meter the
current AF target, and put a check (
v ) next to it.
• Select an option using
FG
and press the
Q
button to put a check ( v ) next to it.
To remove the check, press the
Q
button again.
Spot Applied when [Metering] is [
C
] (spot metering).
Spot Hilight Applied when [Metering] is [ C Hi] (spot highlight metering).
Spot Shadow Applied when [Metering] is [
C
Sh] (spot shadow metering).
# [Face & Eye Detection] turns off automatically.
# The selected option takes effect when
I Single or
y
Small is selected as the AF target
mode (P. 77).
#
The camera zooms in on the selected AF target during focus zoom (P. 80).