OM SYSTEM OM-1 Mirrorless Camera - Manual (Page 193)

193 EN
Playback
5
Setting playback functions
Rotating Pictures (Rotate)
Choose whether to rotate photographs.
1 Play the photograph back and press the
Q
button.
2 Select [Rotate] and press the
Q
button.
3 Press
F
to rotate the image counterclockwise,
G
to rotate it clockwise; the
image rotates each time the button is pressed.
• Press the
Q
button to save settings and exit.
• Movies and protected images cannot be rotated.
% The camera can be configured to automatically rotate portrait-orientation pictures during
playback.
g
“Automatically rotating portrait-orientation pictures for playback (
R
)”
(P. 205)
[Rotate] is not available when [Off] is selected for [ R
].
Protecting Pictures (
0
)
Protect images from accidental deletion.
1 Display the image you want to protect and press the
0
button.
•
0
(protection icon) appears on the image. Press the
0
button again to cancel protection.
• When an unprotected image is displayed, you can hold
the
0
button and rotate the front or rear dial to protect
all images displayed while the dial is rotated. Any
previously-protected images displayed while the dial is
rotated will be unaffected.
0
(protect) icon
16:30:43
4:3 ± 0.0 1/ 100
2022/02/01 16:30:43 101-0001
4:3
19/32
F 3.5 ISO 200 ± 0.0
1
N+RAW L
100 % 100 % r r O O
1/ 100
2022/02/01 101-0001 19/32
F 3.5 ISO 200 N+RAW
0 0
• When a protected image is displayed, you can hold the
0
button and rotate the front
or rear dial to remove protection from all images displayed while the dial is rotated. Any
previously-unprotected images displayed while the dial is rotated will be unaffected.
• The same operations can be performed during playback zoom or when a picture is
selected in the index display.
%
You can also protect multiple selected images.
g
“Selecting Multiple Pictures (Share
Order Selected, Rating Selected,
0
, Copy Select, Erase Selected)” (P. 197).)
#
Formatting the card erases all data including protected images.
Copying an image (Copy)
When there are cards with available space in both slots 1 and 2, you can copy an
image to the other card.
1 Display an image you want to copy and press the
Q
button.
2 Highlight [Copy] and press the
Q
button.
3 Choose whether to specify the destination folder.
• If you select [Assign], choose a destination folder.
•
If a folder has already been specified, the name of the folder is displayed. To select a
different folder, press I
.