OM SYSTEM OM-1 Mirrorless Camera - Manual (Page 298)

298 EN
Information
10
Wireless remote control flash photography
PA S M B
n
Wireless flash photography is available with compatible flash units that support
wireless remote control (RC). The remote flash units are controlled via a unit mounted
on the camera hot shoe. Settings can be adjusted separately for the units in up to three
other groups.
RC mode must be enabled on both the master and remote flash units (P. 297).
1
Set the remote flash units to RC mode and place them as desired.
•
Turn the external flash units on, press the MODE
button, and select RC mode.
•
Select a channel and group for each external flash unit.
2 Select [On] for [
#
RC Mode] (P. 124).
• The camera will exit to the shooting display.
• “RC” will be displayed.
RC RC
1 1023 1023
P 1/ 250 P 1/ F 250 5.6 5.6
1 1 [1:02:03] [1:02:03] FF 60p 60p L-8 L-8
S-AF S-AF
33
L 1 4K
# #
F 00 + - 0.0 0.0
100 % 100 % r r O O
200 200 ISO
Auto
ISO
Auto
RC
3 Press the
Q
button.
• The RC mode super control panel will be displayed.
• The standard LV super control panel can be displayed
by pressing the
INFO
button. The display will change
each time the
INFO
button is pressed. ± 0.0 ± 0.0
A Mode
RC RC
0.0
5.6 250 P
Ch1 Low
TTL
Off
Off
A
Small
1/ Auto
ISO
#
#
x
G 3
0 + -
C
B
[ 1:02:03 ]
1023
r ±
F
200
WB Auto
RC mode super control panel