OM SYSTEM OM-1 Mirrorless Camera - Manual (Page 215)

215 EN
Customizing the Camera
6
„ Using multi function options (Multi Function)
Assign multiple roles to a single button.
% To use the multi function feature, you must first assign [Multi Function] to a camera control
using [Button Settings] (P. 208).
Choosing a function
1 Hold the button to which [Multi Function] is assigned
and rotate the front or rear dial.
• Rotate the dial until the desired feature is highlighted.
Release the button to select the highlighted feature.
2 Press the button to which [Multi Function] is
assigned.
ISO ISO WB WB S-OVF S-OVF
Highlight&Shadow Control Highlight&Shadow Control
3 Adjust settings.
The multi-function button can be used to:
Highlight&Shadow
Control Adjust brightness using the front or rear dial. Press the
INFO
button
to choose the tone range (highlights, shadows, or mid-tones).
Color Creator Use the front dial to adjust hue and the rear dial to adjust saturation.
K
ISO
n
ISO
Choose a setting using the front or rear dial.
K
WB
n
WB
Magnify The zoom frame will be displayed.
Image Aspect Choose a setting using the front or rear dial.
K
LV Mode Press the button to switch between [Standard] and [S-OVF].
Peaking
Press the button to turn the feature on or off.
• You can choose the options displayed.
g
[Multi Function Settings] (P. 236)
%
During shooting, [Highlight&Shadow Control] can also be set by pressing the
F
(Exposure compensation) and then pressing the
INFO
button.