OM SYSTEM OM-1 Mirrorless Camera - Manual (Page 261)

261 EN
Connecting the Camera to External Devices
8
Pairing the Camera and Smartphone (Wi-Fi Connection)
Follow the steps below when connecting the devices for the first time.
• Adjust pairing settings using OM Image Share, not the settings app that is part of the
smartphone operating system.
Super Control Panel
r O
Menu
MENU n e n
4. Wi-Fi/Bluetooth
n
Wi-Fi Connection
• You can also connect by tapping
rO
in the live view display.
1 Launch the copy of the dedicated OM Image Share app previously installed
on your smartphone.
2 Select [Device Connection] and press the
Q
button.
3 Follow the on-screen guide to adjust Wi-Fi/ Bluetooth ® settings.
• The Bluetooth local name and passcode, the Wi-Fi SSID and password, and a QR
code are displayed in the monitor.
MENU
3/3
Bluetooth Name xxxxxxxxxxx :
Bluetooth Passkey 000000 :
Wi-Fi SSID xxx-x-x-xxxxxxxx :
Wi-Fi Password 0000000000000000 :
r r O O Connection Setup
Scan the QR code, using
the OI.Share app.
QR code
Wi-Fi SSID
Wi-Fi Password
Bluetooth local name
Bluetooth Passcode
4 Tap the camera icon at the bottom of the OM Image Share display.
• An [Easy Setup] tab will be displayed.
5 Follow the on-screen instructions in OM Image Share to scan the QR code
and adjust connection settings.
• If you are unable to scan the QR code, follow the on-screen instructions in OM Image
Share to adjust settings manually.
-
Bluetooth ® : To connect, select the local name and enter the passcode displayed
in the camera monitor into the Bluetooth settings dialog in OM Image
Share.
- Wi-Fi: To connect, enter the SSID and password displayed on the camera
monitor into the Wi-Fi settings dialog in OM Image Share.
•
O
on the screen will turn green when pairing is complete.
• The Bluetooth ® icon indicates the status as follows:
r
: The camera is emitting wireless signal.
s
: Wireless connection has been established.
6 To end the Wi-Fi connection, press
MENU
on the camera or tap on
the monitor screen.
•
You can also turn the camera off and end the connection from OM Image Share.
• At default settings, Bluetooth ® connection is kept active even after Wi-Fi connection
is terminated, allowing you to shoot remotely with a smartphone. To set the camera
to also terminate
Bluetooth ® connection when terminating Wi-Fi connection, set
[Bluetooth] to [Off].