Fn lever function] cannot be used (p. 221), Customizing the camera – OM SYSTEM OM-1 Mirrorless Camera User Manual
Page 221
221
EN
Customizing the Camera
6
#
This function cannot be used in the following cases.
- [mode3] is selected for [
K
- [Fn Lever/Power Lever] (P. 222) is set to [ON/OFF] or [OFF/ON].
Using [mode2] of [
K
Fn Lever Function] / [
n
Fn Lever Function]
When [mode2] is selected for [
K
Fn Lever Function] / [
n
Fn Lever Function], the
camera will store separate focus settings for Positions 1 and 2.
1
Rotate the
Fn
lever to Position 1 and set the AF
settings.
• The camera can store the settings that have been
checked (
v
) in:
[AF Mode]:
S-AF, C-AF, etc.
[AF Target Mode]:
M
Small,
o
All, etc.
[AF Target Point]:
AF-target position
MENU
mode2
MENU
OK
AF Mode
AF Target Mode
AF Target Point
2
Repeat the process for Position 2.
3
Rotate the lever to the desired position to recall the
saved settings.