Shooting settings – OM SYSTEM OM-1 Mirrorless Camera User Manual
Page 165
165
EN
Shooting Settings
4
When [Overlay] is set
When [On] is selected for [Overlay], a list of pictures is displayed.
1
Highlight a picture using
FGHI
and press the
Q
button.
• Only RAW images can be selected.
2
Press the
MENU
button to close the menu.
• A
X
icon will be displayed.
• The selected picture is overlaid on the screen.
3
Take pictures.
• You can take additional pictures that will be overlaid on the previously-chosen
photograph.
#
The camera will not enter sleep mode during multiple exposure photography.
#
Pictures taken with other cameras cannot be used for multiple exposures.
#
RAW pictures taken using High Res Shot cannot be used for multiple exposures.
#
The RAW pictures listed in the image-selection display when [
On
] is selected for [Overlay]
are those processed using the settings in effect at the time the photograph was taken.
#
Exit multiple exposure mode before adjusting shooting settings. Some settings cannot be
adjusted while multiple exposure mode is in effect.
#
Performing any of the following operations after the first shot is taken ends multiple
exposure photography:
turning the camera off, pressing the
q
or
MENU
button, choosing a different shooting
mode, or connecting cables of any type. Multiple exposure is also canceled when the
battery is exhausted.
#
The image-selection display for [Overlay] shows the JPEG copies of photographs taken
with RAW + JPEG selected for image quality.
#
Live composite photography ([Live Comp]) is not available in mode
B
.
#
The following are not available in multiple exposure mode:
HDR, bracketing, focus stacking, interval-timer photography, keystone compensation,
the live ND filer, fisheye correction, and High Res Shot.
%
Pictures taken with RAW selected for [
K
K
] can also be overlaid during playback.
g