OM SYSTEM OM-1 Mirrorless Camera - Manual (Page 269)

269 EN
Connecting the Camera to External Devices
8
Pairing the Computer with the Camera (New Link)
PA S M B
n
The camera and computer must be paired in order to connect. Up to four computers
can be paired with the camera at a time. To pair a computer with the camera, connect it
via USB. Pairing need only be performed once per computer.
1
After confirming that the camera is off, connect it to the computer using the
USB cable.
• When attaching the USB cable, use the supplied cable protector and cable clip to
prevent damage to the connectors.
g
“Attaching Cable Protectors” (P. 19)
USB port
USB connector
USB cable (supplied)
• The locations of USB ports vary from computer to computer. See the documentation
provided with the computer for information on USB ports.
• If the USB port on the computer is Type A port, use the optional CB-USB11 cable.
2 Turn the camera on.
• The camera will display a message prompting you to identify the device to which the
USB cable is connected.
%
If the message is not displayed, select [Select] for [USB Mode] (P. 252).
#
If the batteries are very low, the camera will not display a message when connecting
to a computer. Be sure the batteries are charged.
3 Highlight [
0
RAW/Control] using
FG
on the
arrow pad and press the
Q
button.
USB
MTP
0 RAW/Control
USB PD
OK
Storage
Exit
4 Launch the copy of “OM Capture” installed on the
computer.
• After starting up, “OM Capture” will prompt you to
choose the connection type.