OM SYSTEM OM-1 Mirrorless Camera - Manual (Page 117)

117 EN
Shooting Settings
4
Long Exposure Noise Reduction Options (Noise Reduction)
PA S M B
n
Choose whether to process photos taken at slow shutter speeds to reduce image
artifacts (“noise”). At slow shutter speeds, noise is caused by the heat generated from
the camera itself. After each photo is taken, the camera captures a second image for
noise reduction, causing a delay equal to the selected shutter speed before the next
photo can be taken.
Menu
MENU n _ n
3. ISO/Noise Reduction
n
Noise Reduction
Off
Noise reduction not performed.
On Noise reduction is performed at all shutter speeds.
Auto
Noise reduction is performed automatically when the camera’s
internal temperature is elevated.
#
During noise reduction, the camera displays the time remaining until the process is
complete.
# During sequential shooting, [Off] is selected automatically and noise reduction is not
performed.
# Noise reduction may not produce the desired effects depending on the subject and
shooting conditions.
% To use this function in silent mode, it is required that you configure the [Silent s Settings]
setting (P. 132).