OM SYSTEM OM-1 Mirrorless Camera - Manual (Page 250)

250 EN
Setting Up the Camera
7
Viewfinder Brightness and Hue (EVF Adjust)
PA S M B
n
Adjust viewfinder brightness and hue. The display switches to the viewfinder while
these settings are being adjusted.
Menu
MENU n e n
3. Monitor/Sound/Connection
n
EVF Adjust
j
(Color temperature)
Adjust color temperature.
Use the front dial or
HI
to adjust the “amber–blue” axis.
Moving the pointer (
M
) closer to A adds a red cast and moving
it closer to B adds a blue cast.
Use the rear dial or
FG
to adjust the “green–magenta” axis.
Moving the pointer (
M
) closer to G adds a green cast and
moving it closer to M adds a magenta cast.
k
(Brightness)
[EVF Auto Luminance Off] / [EVF Auto Luminance On]
:
Viewfinder brightness and indicator contrast adapt automatically
to ambient lighting conditions. Change the setting using
HI
.
[
k ]
:
Adjust brightness. Use
FG
to choose a setting.
[-7]
–
[±0]
–
[+7]
#
Brightness cannot be changed when [EVF Auto Luminance
On]
is selected.
• Press the
INFO
button to switch between color temperature and brightness and set each
item.
• You can reset the setting by pressing and holding the
Q
button.
Config
uring the eye sensor (Eye Sensor Settings)
PA S M B
n
You can specify how the camera operates when you put your eye to the viewfinder.
Menu
MENU n e n
3. Monitor/Sound/Connection
n
Eye Sensor Settings
EVF Auto Switch
[Off]
: The display does not switch when you put your
eye to the viewfinder. To switch the display, press the
u
button.
[On] : The viewfinder automatically turns on when you
put your eye to the viewfinder.
Behavior when switched
Choose what will be displayed when the display
automatically switches to the viewfinder.
[Maintain Screen]
: The screen that was shown on the
monitor will be shown in the viewfinder.
[Shooting Screen] : The viewfinder shows the live view
even if the playback screen or a menu was shown on
the monitor.