OM SYSTEM OM-1 Mirrorless Camera - Manual (Page 275)

275 EN
Connecting the Camera to External Devices
8
4 If the camera is able to connect, the network will be displayed with a check
(
v ) next to the network name.
• Password-protected networks are indicated by a t icon.
• If the camera has been paired with more than one computer, you will be prompted to
choose a computer before the network is displayed. Highlight the desired computer
using the
FG
buttons and press the
Q
button.
•
The camera can be used only with the selected computer. To select a different
computer, you must first terminate the current connection.
• If the connection fails, the camera will display a
message to that effect, followed by the options shown in
Step 3. Repeat Steps 3–4.
100 % 100 %
Connection failed
5 Press the
Q
button to exit to the shooting display.
• Standard shooting indicators will be displayed.
O
on
the screen will turn green.
O
1 1023 1023
P
1/ 250 P
1/ F 250 5.6 5.6
1 1 [1:02:03] [1:02:03] FF 60p 60p L-8 L-8
S-AF S-AF
33
200 200
L 1 4K
ISO
Auto
ISO
Auto F 00 + - 0.0 0.0
100 % 100 % r r O O
!
Connecting to Previously-Selected Networks
• The camera will automatically reconnect to previously-selected networks when you select
[PC Connection] via the
rO
icon. You will not be required to supply a password.
•
If multiple networks are available, the camera will connect first to the most recently-used
network.
• Once the camera has connected, it will display a list of available networks with the current
network shown by a check mark v .
•
To connect to a different network, highlight it in the list and press the Q
button.
• If the camera has been paired with more than one computer on the network, you will be
prompted to choose a computer before the network list is displayed. Highlight the desired
computer using the
FG
buttons and press the
Q
button.