OM SYSTEM OM-1 Mirrorless Camera - Manual (Page 281)

281 EN
Connecting the Camera to External Devices
8
„ Deleting pairing
1 Select [Delete Pairing] and press the
Q
button.
2 Select [Yes] and press the
Q
button.
#
When you have paired the camera with a remote control, you have to perform [Delete
Pairing] to reset pairing information before you pair the camera with a new remote control.
Shooting from the remote control
PA S M B
n
To connect the camera and remote control wirelessly, be sure that [Bluetooth] ( P. 262 )
is set to [On
r <
]. When set to [On
r <
],
r <
is displayed and the camera will be on
standby for wireless communication with the remote control as soon as it is turned on.
1 Rotate the mode dial of the remote control to
K
or
n
.
2 Press the shutter button on the remote control to
take pictures.
• When the mode dial of the remote control is set to
K
(still photography mode): When you lightly press the
shutter button of the remote control down to the first
position (press the shutter button halfway), the AF
confirmation mark ( (
) will be displayed, and a green
frame (AF target) will be displayed in the focus location.
• When the mode dial of the remote control is set to
n
(movie recording mode): When you press the shutter
button of the remote control, movie recording starts.
Press the shutter button of the remote control again to
stop movie recording.
Shutter button