OM SYSTEM OM-1 Mirrorless Camera - Manual (Page 278)

278 EN
Connecting the Camera to External Devices
8
Ending the Connection
End the Wi-Fi connection. The use of Wi-Fi may be prohibited in some countries or
regions, in which case Wi-Fi should be disabled.
„ Ending the Current Connection
1 Tap
O
in the camera monitor.
1 1023 1023
P
1/ 250 P
1/ F 250 5.6 5.6
1 1 [1:02:03] [1:02:03] FF 60p 60p L-8 L-8
S-AF S-AF
33
200 200
L 1 4K
ISO
Auto
ISO
Auto F 00 + - 0.0 0.0
100 % 100 % r r O O
r r O O
•
You will be prompted to confirm whether you wish to
disconnect.
• The network SSID is shown in the display.
MENU MENU OK
SSID:SSID_001
PC PC Connection
Disconnect
Maintain
Wi-Fi is active
2 Highlight [Disconnect] using
FG
and press the
Q
button.
• The camera will terminate the connection and exit to the shooting display.
•
A confirmation dialog will be displayed if data remain to be uploaded. To terminate the
connection, highlight [Yes] and press the
Q
button.
3 To reconnect, tap
O
or select [Wi-Fi Connection] > [PC Connection] and
press the
Q
button.
• The camera will automatically reconnect to previously-selected networks.
• To connect to a new network, highlight [Maintain] in Step 2 and press the
Q
button.
Choose from a list of available networks and adjust settings as described in “Choosing a
Network from a List (Connect from Access Point List)” (P. 274).
•
If you turn the camera off while upload is in progress, you will be prompted to choose
whether to power the camera down and terminate the Wi-Fi connection immediately or to
power the camera down only after upload is complete.
„ Disabling Wi‑Fi/Bluetooth ®
Set [Airplane Mode] (P. 260) to [On]. Wireless communication will be disabled.