OM SYSTEM OM-1 Mirrorless Camera - Manual (Page 277)

277 EN
Connecting the Camera to External Devices
8
3 Take pictures using camera controls.
• The pictures will be uploaded to the computer after they are saved to the camera
memory card.
• A
p
(“image upload”) icon will be displayed while
upload is in progress.
• The camera will upload only photos and movies
recorded while the camera and computer are
connected. Any pictures taken before Wi-Fi was
enabled on the camera will not be uploaded.
• The upload queue for each card can contain no more
than 3000 pictures.
Image upload
1 1023 1023
P
1/ 250 P
1/ F 250 5.6 5.6
1 1 [1:02:03] [1:02:03] FF 60p 60p L-8 L-8
S-AF S-AF
33
200 200
L 1 4K
ISO
Auto
ISO
Auto F 00 + - 0.0 0.0
100 % 100 % r r PC PC
%
While the camera is connected to a network:
- Sleep mode is disabled
- Interval-timer photography is not available
- Some restrictions apply to the options available during playback
%
[PC connection ended] options will be displayed when the camera’s connection to the
network ends. Upload of any remaining data will resume when the connection is re-
established. Note, however, that remaining data will not be uploaded if:
- The Wi-Fi connection is ended using camera controls
-
The camera is turned off
- The source memory card is removed
% If “OM Capture” displays the message [This application is unable to find a camera in the
camera control mode.], check:
- that the camera has been paired with the computer,
- that you selected the correct computer when connecting to the network, and
- that the camera is registered with the computer (Windows only).
g
“Readying the
Computer (Windows)” (P. 268)