Canon imageCLASS D1650 All-in-One Monochrome Laser Printer User Manual
Page 643

#701
Authentication failed because an incorrect Department ID or PIN was entered when the Department ID
Management was activated.
●
Enter the correct Department ID and PIN.
Continuing operating without entering a Department ID was attempted even though unknown-ID jobs
(functions that permit operations without a Department ID and PIN) were disabled in the Department ID
Management.
●
Enable unknown-ID jobs in System Manager Mode in Remote UI.
Blocking Jobs When Department ID Is Unknown(P. 357)
#703
Data could not be written because the memory space that was allocated for images was full when
sending an e-mail/I-Fax or storing to a shared folder/FTP server.
●
If another sending document is queued, wait for a while until it is completed, and send again.
●
Divide the document into multiple sections before sending.
●
Delete the documents that are stored in memory.
●
Turn OFF the machine, wait for at least 10 seconds, and turn it back ON.
#751
The FTP server has not been started up or a network connection has been cut.
(Failure to connect to the destination is sometimes caused by a disconnection en route.)
●
Check the destination.
●
Check the network status.
Viewing Network Settings(P. 39)
The IP address was not set correctly.
●
Check
#752
E-mail sending or I-Fax sending/receiving was impossible because an incorrect SMTP/POP3 server name
was set.
●
Check the SMTP/POP3 server name, and correct the setting.
Configuring Basic E-Mail Settings(P. 88)
Configuring E-Mail/I-Fax Communication Settings(P. 91)
E-mail sending or I-Fax sending/receiving was impossible because an incorrect domain name was set.
●
Check the domain name, and correct the setting.
Troubleshooting
635