Canon imageCLASS D1650 All-in-One Monochrome Laser Printer - Manual (Page 172)

Automatically Selecting an Appropriate Paper Source
for Each Function
3JX3-037
Enable or disable the automatic paper source selection feature for each paper source. If this feature is set to , the
machine automatically selects a paper source that is loaded with paper of the appropriate size for each print job. Also,
when the paper in the selected paper source runs out, this feature enables continuous printing by switching from that
paper source to another that is loaded with the same paper size.
1
Select
2
Select .
3
Select .
4
Select the target function.
● When the target function is report/list printing or memory media print, select .
5
For each paper source to which you want to apply the automatic paper source
selection feature, select .
● When the optional paper feeder is installed, its paper drawer is also displayed.
● Always specify for at least one of the paper drawers. If you select for all the drawers, then you
cannot finish the setting procedure.
6
Select .
Basic Operations
164