Canon imageCLASS D1650 All-in-One Monochrome Laser Printer - Manual (Page 617)

Are you using appropriate paper?
● Check usable paper, and replace with appropriate paper.
Available Paper(P. 675)
Loading Paper(P. 139)
Is the platen glass dirty?
● Clean the platen glass and the underside of the feeder.
Cleaning the Platen Glass(P. 561)
Have you cleaned the fixing unit?
● Clean the fixing unit.
Cleaning the Fixing Assembly(P. 565)
Is the machine installed in an environment where the temperature changes
rapidly and drastically?
● When the temperature changes rapidly in the environment where the machine is installed, condensation
occurs, which may cause fading or bleeding in images and text. If is set to ,
condensation inside the machine will be removed. Condensation removal may be performed automatically
due to temperature change.
(P. 484)
● While condensation removal is being performed, printing may not be performed properly and blank paper
may be output.
● If you set to , you need to keep the machine turned ON to maintain the effect of condensation
removal.
Do black horizontal streaks appear in the leading edge of paper?
● Change the setting of . Setting to may solve the problem.
(P. 481)
● If you set to , the printing speed will be slower.
Is the amount remaining in toner cartridge running low?
● Check how much the amount remaining in toner cartridges is left, and replace the toner cartridges as
necessary.
● Regardless of the displayed toner level, the toner cartridge may have reached the end of its lifetime due to
the machine's environmental conditions and the deteriorated materials in the cartridge. Replace the toner
cartridge.
Replacing the Toner Cartridge(P. 566)
Troubleshooting
609