Canon imageCLASS D1650 All-in-One Monochrome Laser Printer - Manual (Page 237)

Recalling Previously Used Settings for Sending (Recall
Settings)
3JX3-04J
You can recall the destinations specified in the past. When you specify a previously
used destination, the machine also sets the same fax settings such as density you
used the last time you sent documents to that destination.
● When is set to , you cannot use this feature. Disabling Use of
Previously Used Destinations(P. 405)
● Turning OFF the machine or setting to deletes the past destinations, and
disables this feature. Restricting New Destinations that Can Be Specified(P. 405)
● The destinations in Manual Sending are not available for this feature. Sending a Fax after a Phone Call
(Manual Sending)(P. 232)
● When you specify a destination using this feature, any destinations that you have already specified are
deleted.
1
Place the original(s). Placing Originals(P. 135)
2
Select in the Home screen. Home Screen(P. 122)
● If the login screen appears, specify the user name, the password, and the authentication server. Logging
in to Authorized Send(P. 133)
3
Select in the Fax Basic Features screen. Fax Basic Features Screen(P. 214)
● If the destinations set by the previous user are still selected, this can cause transmission errors. Always reset
the settings before sending.
4
Select in the tab.
5
Select the destination.
● When you transmit to multiple destinations, only the address specified for the first transmission is displayed
in the log, but all the destinations are specified.
Faxing
229