Canon imageCLASS D1650 All-in-One Monochrome Laser Printer - Manual (Page 586)

Adjusting Print Position
3JX3-0A0
If a document is printed off-center or out of the printable range, adjust the print position. You can adjust the print
position for each paper source. You can adjust the print position in the range -0.20" to +0.20" (-5.0 mm to +5.0 mm) in
increments of 0.01" (0.1 mm).
Checking the Direction and Distance to Adjust
When you adjust the print position, specify the direction using "+" and "-" and the distance using "mm." For
/, specify a value with a "+" sign to shift the print
position in the up-to-down direction. For /,
specify a value with a "+" sign to shift the print position in the left-to-right direction. To shift in the reverse
direction, specify a value with a "-" sign.
/(Back Side)> /Horizontally (Back Side)>
1
Select
2
Select .
3
Select .
4
Select the paper source.
● When the optional paper feeder is installed, its paper drawer is also displayed.
5
Select the combination of adjustment direction and printing side.
Maintenance
578