Canon imageCLASS D1650 All-in-One Monochrome Laser Printer - Manual (Page 61)

Configuring Ethernet Settings
3JX3-010
Ethernet is a standard for communicating data in a local area network (LAN). You can
set the communication mode and the Ethernet type. In general, the machine can be
used without changing the defaults ( (P. 470) ), but
you can change these settings to suit your network environment.
1
Select
2
Select .
● If the login screen appears, enter the correct ID and PIN. Logging in to the Machine(P. 133)
3
Select .
4
Select whether to configure Ethernet settings automatically or manually.
● If auto-detection is enabled, the machine detects and automatically sets the Ethernet communication mode
and the type that can be used.
Configuring Ethernet settings automatically
Select in .
Configuring Ethernet settings manually
1
Select in .
2
select the communication mode.
Alternately sends and receives communication data. Select when the machine is connected to a
networking device using half duplex.
Setting Up
53