Canon imageCLASS D1650 All-in-One Monochrome Laser Printer User Manual
Page 303

Select for originals whose images on the front and back sides face the same direction.
Select for originals whose images on the front and back sides face in opposite directions.
●
For information about other scan settings, see Scanning Clearly(P. 300) or Adjusting Balance
between File Size and Image Quality (Data Size)(P. 309) .
●
For e-mail, you can specify the subject, message, reply-to address, and priority as necessary. Specifying
E-Mail Settings(P. 313)
7
Select
●
If the
➠
Scanning of the original starts.
●
If you want to cancel, select
When placing originals in the feeder in step 1
When scanning is complete, the sending/saving process starts.
When placing originals on the platen glass in step 1
When scanning is complete, follow the procedure below (except if you selected JPEG as a file format).
1
If there are additional pages of originals to be scanned, place the next original on the platen glass, and
select
●
Repeat this step until you finish scanning all of the pages.
●
When there is only one page to be scanned, proceed to the next step.
2
Select
➠
The sending/saving process starts.
If the
●
Enter the user name and password, and select
File name of the sent document
●
The file name of a sent document is automatically assigned based on the following format: communication
management number (four digits)_sent date and time_document number (three digits).file extension
name.
Scanning
295