Setting up using the setup guide, Setting up using the setup guide(p. 10) – Canon imageCLASS D1650 All-in-One Monochrome Laser Printer User Manual
Page 18

Setting Up Using the Setup Guide
3JX3-004
1660-009
When the machine is turned on ( Turning ON the Machine(P. 116) ) for the first time, the Setup Guide starts up to
assist you to configure the initial settings of the machine by following the on-screen guidance. In the Setup Guide, the
setting screens are displayed in the following order.
Step 1
Setting the Display Language and the Country or Region
Set the language to be displayed on the operation panel screen or in reports, as well as the
country or region where the machine will be used.
1
Select a language.
2
Select
3
Select a country or region.
Step 2
Setting the Date and Time
Adjust the machine's date/time.
1
Select a time zone.
What is UTC?
●
Coordinated Universal Time (UTC) is the primary time standard by which the
world regulates clocks and time. The correct UTC time zone setting is required
for Internet communications.
2
Enter the date and time, and select
●
Tap the entry field, and enter the date and time.
Step 3
Setting the Access Security Measures
Set the System Manager ID of the system manager account and a PIN to access the Remote UI.
You can only use the Remote UI if you set a PIN.
1
Select
●
If you select
configured, and the Setup Guide proceeds to step 4.
2
Select
●
If you select
default settings, and the Setup Guide proceeds to number 4 in this step.
3
Specify the System Manager ID and PIN.
●
Specify the
●
Enter numbers for each item, and select
●
The Confirm screen is displayed. Enter the PIN once again to confirm.
●
Do not forget your PIN.
Setting Up
10