Scanning with airprint, Scanning with airprint(p. 338), Scanning from a mac – Canon imageCLASS D1650 All-in-One Monochrome Laser Printer User Manual
Page 346
Scanning with AirPrint
3JX3-06H
You can use AirPrint to transfer the data scanned by the machine directly to a Mac.
System Requirements
To scan with AirPrint, you need a Mac with OS X 10.9 or later installed. To scan using TLS, you need a Mac with
OS X 10.11 or later installed.
Network Environment
One of the following environments is required.
●
An environment where an Apple device and the machine are connected to the same LAN
●
An environment where a Mac is connected to the machine via USB
●
For scanning, it is required to set
●
Before scanning, it is required to put the machine into online state. When the auto online function (
●
You cannot scan while settings for operations are being made, or while the machine is performing any
operation whatsoever.
Scanning from a Mac
1
Make sure that the machine is turned ON and connected to the Mac.
●
For how to make sure of this, see Setting Up the Network Environment(P. 15) .
2
Add the machine to the Mac from [System Preferences] [Printers & Scanners].
●
If the machine has already been added, this operation is not required.
3
Select this machine from the list of printers in [Printers & Scanners].
Linking with Mobile Devices
338