Canon imageCLASS D1650 All-in-One Monochrome Laser Printer - Manual (Page 478)

Select the Ethernet type (10BASE-T/100BASE-TX/1000BASE-T) and the communication mode of Ethernet (half-duplex/
full-duplex). You can also view the MAC address for wired LAN.
Select whether to automatically detect or manually select the communication mode and the Ethernet type.
Configuring Ethernet Settings(P. 53)
<10BASE-T>
<100BASE-TX>
<1000BASE-T>
● When is set to , you cannot select <1000BASE-T>.
Check the MAC address of the machine, which is a number unique to each communication device. Viewing
the MAC Address for Wired LAN(P. 39)
*1*2
Enable or disable IEEE 802.1X authentication. Configuring IEEE 802.1X Authentication Settings(P. 396)
Without proper security, unauthorized third parties can access computers and other communication devices that are
connected to a network. To prevent this unauthorized access, specify the settings for packet filter, a feature that
restricts communication to devices with specified IP addresses or MAC addresses.
Setting Menu List
470