Canon imageCLASS D1650 All-in-One Monochrome Laser Printer - Manual (Page 64)

Setting a Wait Time for Connecting to a Network
3JX3-012
When a network is designed to enjoy redundant connectivity with multiple switching hubs or bridges, it must have a
mechanism to prevent packets from looping. One effective solution is to define the role of each switch port. However,
communication may still be disrupted for several tens of seconds immediately after you change the way that network
devices are connected, or if you add a new device. If this type of problem occurs, set a wait time for connecting to the
network.
1
Select
2
Select .
● If the login screen appears, enter the correct ID and PIN. Logging in to the Machine(P. 133)
3
Select .
4
Enter the waiting time required to start a communication with the network, and
select .
LINKS
Configuring Ethernet Settings(P. 53)
Changing the Maximum Transmission Unit(P. 55)
Setting Up
56