Canon imageCLASS D1650 All-in-One Monochrome Laser Printer - Manual (Page 281)

● When the specified page range does not match any of the pages of the PDF file, printing is not performed.
Specify whether to enlarge or reduce the original according to the print range of paper. Note that size
enlargement/reduction will not affect the aspect ratio of the original.
Specify whether to extend the print range to the paper size.
● If you set to , part of print data may not be printed in edge areas or paper may be partly smudged
depending on the document.
This setting specifies whether to print annotations in the PDF file.
Prints no annotations.
Prints only those annotations that are specified to be printed in the PDF file.
You can print password protected PDF files by entering the password required to open them. Enter the
password, and select .
You can select the printing method used to reproduce halftones (the intermediate range between the lighter
and darker areas of an image) for optimal image quality. You can make this setting for each of the types of
image contained in one document. See (P. 513) for the description of the setting.
Specify the way of printing color data in black and white. See (P. 514) for the
description of the setting.
Adjust the toner density to be used for printing. See (P. 497) for the description of the setting.
Printing
273