PLANET XGS3-24042 - Manual (Page 85)

6-4
ip http server
Enable http function in commander
switch and member switch.
Notice: must insure the http function
be enabled in member switch when
commander switch visiting member
switch by web. The commander
switch visit member switch via beat
member node in member cluster
topology.
7. Manage cluster network with snmp
Command Explanation
Global Mode
snmp-server enable
Enable snmp server function in
commander switch and member
switch.
Notice: must insure the snmp server
function be enabled in member
switch when commander switch
visiting member switch by snmp. The
commander switch visit member
switch via configure character string
@sw
mber id>.
6.3 Examples of Cluster Administration
Scenario:
The four switches SW1-SW4, amongst the SW1 is the command switch and other switches are member
switch. The SW2 and SW4 is directly connected with the command switch, SW3 connects to the command
switch through SW2.
Figure 6-1 Examples of Cluster
Configuration Procedure
1. Configure the command switch
E1 E1 E1 E1 E2 E2
SW1 SW2 SW3 SW4