PLANET XGS3-24042 - Manual (Page 584)

64-28
（1） Configure the preemptive mode for VRRP
（2） Configure VRRP priority
（3） Configure VRRP Timer intervals
（4） Configure VRRP interface monitor
1. Create/Remove the Virtual Router
Command Explanation
Global Mode
router vrrp <vrid>
no router vrrp <vrid>
Creates/Removes the Virtual Router.
2. Configure VRRP Dummy IP Address and Interface
Command Explanation
VRRP protocol configuration mode
virtual-ip <ip>
no virtual-ip
Configures VRRP Dummy IP address; the
"no virtual-ip" command removes the
virtual IP address.
interface {IFNAME | Vlan <ID>}
no interface
Configures VRRP interface, the "no
interface" command removes the interface.
3. Activate/Deactivate Virtual Router
Command Explanation
VRRP protocol configuration mode
enable Activates the Virtual Router.
disable Deactivates the Virtual Router.
4. Configure VRRP Sub-parameters
(1) Configure the preemptive mode for VRRP
Command Explanation
VRRP protocol configuration mode
preempt-mode {true| false} Configures the preemptive mode for VRRP.
(2) Configure VRRP priority
Command Explanation
VRRP protocol configuration mode
priority <priority> Configures VRRP priority.
(3) Configure VRRP Timer intervals