PLANET XGS3-24042 - Manual (Page 682)

81-36
mpls enable
no mpls enable
Necessary
Enable MPLS; the no operation will disable
MPLS.
2. Configure VPN instances (necessary)
(1) Create VPN instances and enter VPN instance view
(2) Configure VPN instance RD
(3) Configure VPN instance RT
(4) Configure VPN instance to relate with the interface
Command Explanation
Global Configuration Mode
[no] ip vrf <vrf-name>
Necessary
Create VPN instances; no VPN instance is
created by default.
VRF Configuration Mode
[no] rd <ASN:nn_or_IP-address:nn>
Necessary
Configure VPN instance RD; no RD is
created by default.
[no] route-target {import | export | both}
<rt-value>
Necessary
Configure VPN instance RT.
Interface Configuration Mode
[no] ip vrf forwarding < vrf-name >
Necessary
Configure VPN instance to relate with the
interface.
mpls proxy loopback-group
<1-max_agg_num>
no mpls proxy loopback-group
Enable MPLS proxy, the default does not
enable the function, enable MPLS proxy
when the boardcard of VRF ingress does
not support MPLS.
[no] ip address <ip-address> <mask>
Necessary
Configure the private network IP address of
the interface directly connecting PE and
CE.
3. Configure basic MPLS VPN (necessary)
(1) Configure to use EBGP between PE-CE
1) Configure the remote PE as the public network VPNv4 neighbor
2) Enter the BGP-VPN instance view
3) Configure CE as the VPN private network neighbor
4) Advertise local private network routes