PLANET XGS3-24042 - Manual (Page 171)

18-8
Global Mode
policy-map
no policy-map <policy-map-name>
Create a policy map and enter policy
map mode; the no command deletes the
specified policy map.
class <class-map-name> [insert-before
]
no class <class-map-name>
After a policy map is created, it can be
associated to a class. Different policy or
new DSCP value can be applied to
different data streams in class mode; the
no command deletes the specified
class.
set internal priority
no set internal priority
Assign a new internal priority for the
classified traffic; the no command
cancels the new assigned value.
Single bucket mode:
policy
({exceed-action
ACTION} )
Dual bucket mode:
policy
[pir ]
| [{exceed-action
ACTION | violate-action ACTION }]
ACTION definition:
drop | transmit | set-internal-priority
| policied-intp-transmit
no policy
Configure a policy for the classified flow.
The non-aggregation policy command
supports three colors. Analyze the
working mode of the token bucket,
whether it is singe rate single bucket,
single rate dual bucket, dual rate dual
bucket, set corresponding action to
different color packets. The no
command will delete the mode
configuration.
policy aggregate <aggregate-policy-name>
no policy aggregate
Apply a policy to classified traffic; the no
command deletes the specified policy
set.
accounting
no accounting
Set statistic function for the classified
traffic. After enable this function under
the policy class map mode, add statistic
function to the traffic of the policy class
map. In single bucket mode, the
messages can only red or green when
passing policy. In the print information,
there are two colors(green and red) of
the packets. In dual bucket mode, there
are three colors(green, red and yellow)
of the packets.
Policy class map configuration mode