PLANET XGS3-24042 - Manual (Page 275)

34-4
autonomic system path field.
As for relevant as-path configurations, please refer to the ip as-path command in BGP configuration.
5. community-list
Community-list is only for BGP. There is a community property field in the BGP routing messages packet for
identifying a community. The community list is for specifying matching conditions for Community-list field.
As for relevant Community-list configuration, please refer to the ip as-path command in BGP configuration
34.2.2 IP Routing Policy Configuration Task List
1． Define route-map
2． Define the match clause in route-map
3． Define the set clause in route-map
4． Define address prefix list
1. Define route-map
Command Explanation
Global mode
route-map {deny | permit}
no route-map [{deny | permit}
]
Configure route-map; the
no route-map
[{deny |
permit}
]
command deletes the
route-map.
2. Define the match clause in route-map
Command Explanation
Route-map configuration mode
match as-path
no match as-path []
Match the autonomous
system as path
access-list the BGP route
passes through; the no
match as-path
[] command
deletes match condition.