PLANET XGS3-24042 - Manual (Page 373)

43-7
ip route
tunnel
no ip route
tunnel
Configure the egress interface of the IPv4 static
route to GRE tunnel.
ipv6 route
tunnel
no ipv6 route
tunnel
Configure the egress interface of the IPv6 static
route to GRE tunnel.
43.3 Example of GRE Tunnel
The Typical Example of GRE Tunnel:
Figure 43-1 the typical network of IPv4 over IPv6 GRE tunnel character
Configuration summary:
 Configure IPv6 network, and ensure IPv6 connectivity.
 Configure the tunnel interface, and the interface that connect PC.
 Configure the tunnel parameters and enable the tunnel interface.
 Enable OSPF route protocol to forward the data between PC1 and PC2 through the tunnel.
2000:3000:1000::1/64
Interface e1/0/11
2005:3000:1000::2/64
Interface e1/0/12
2000:3000:1000::2/64
Interface e1/0/11
Switch C
V11 V12
2005:3000:1000::1/64
Interface e1/0/12
GRE tunnel Switch A Switch B
Tunnel1
100.1.1.1/24
Tunnel 1
100.1.1.2/24 10.1.1.2/24
Interface e1/0/10
20.1.1.2/24
Interface e1/0/10
V10 V20
10.1.1.1/24 20.1.1.1/24
PC1 PC2