PLANET XGS3-24042 - Manual (Page 64)

4-10
Command Explanation
Global Mode
snmp-server engineid
no snmp-server engineid
Configure the local engine ID on the switch. This
command is used for SNMP v3.
5. Configure user
Command Explanation
Global Mode
snmp-server user
[{authPriv | authNoPriv} auth {md5 | sha}
] [access {|}]
[ipv6-access {|}]
no snmp-server user [access
{|}] [ipv6-access
{|}]
Add a user to a SNMP group. This command is
used to configure USM for SNMP v3.
6. Configure group
Command Explanation
Global Mode
snmp-server group
{noauthnopriv|authnopriv|authpriv} [[read
] [write ] [notify
]] [access
{|}] [ipv6-access
{|}]
no snmp-server group
{noauthnopriv|authnopriv|authpriv}
[access {|}]
[ipv6-access
{|}]
Set the group information on the switch. This
command is used to configure VACM for SNMP v3.
7. Configure view
Command Explanation
Global Mode
snmp-server view
{include|exclude}
no snmp-server view
[]
Configure view on the switch. This command is used
for SNMP v3.
8. Configuring TRAP