PLANET XGS3-24042 - Manual (Page 199)

22-36
Interface Configuration Mode
ipv6 nd prefix
<ipv6-address/prefix-length>
>
[off-link] [no-autoconfig]
no ipv6 nd prefix
>
[off-link] [no-autoconfig]
Configure the address prefix and
advertisement parameters of router. The
NO command cancels the address prefix
of routing advertisement.
(8) Configure static IPv6 neighbor Entries
Command Explanation
Interface Configuration Mode
ipv6 neighbor <ipv6-address>
interface
Set static neighbor table entries, including
neighbor IPv6 address, MAC address and
two-layer port.
no ipv6 neighbor <ipv6-address> Delete neighbor table entries.
(9) Delete all entries in IPv6 neighbor table
Command Explanation
Admin Mode
clear ipv6 neighbors Clear all static neighbor table entries.
(10) Set the hoplimit of sending router advertisement
Command Explanation
Interface Configuration Mode
ipv6 nd ra-hoplimit
Set the hoplimit of sending router
advertisement.
(11) Set the mtu of sending router advertisement
Command Explanation
Interface Configuration Mode
ipv6 nd ra-mtu
Set the mtu of sending router
advertisement.
(12) Set the reachable-time of sending router advertisement
Command Explanation
Interface Configuration Mode
ipv6 nd reachable-time
Set the reachable-time of sending router
advertisement.
(13) Set the retrans-timer of sending router advertisement
Command Explanation