PLANET XGS3-24042 - Manual (Page 496)

51-5
access-list {deny | permit} udp {{
} | any-source | {host-source }}
[s-port { | range }]
{{ } | any-destination |
{host-destination }} [d-port { |
range }] [precedence
] [tos ][time-range]
Creates a numbered UDP
extended IP access rule; if the
numbered extended access-list of
specified number does not exist,
then an access-list will be created
using this number.
access-list {deny | permit} {eigrp | gre | igrp |
ipinip | ip | ospf | } {{
} | any-source | {host-source }}
{{ } | any-destination |
{host-destination }} [precedence ]
[tos ][time-range]
Creates a numbered IP extended
IP access rule for other specific IP
protocol or all IP protocols; if the
numbered extended access-list of
specified number does not exist,
then an access-list will be created
using this number.
no access-list
Deletes a numbered extensive IP
access-list.
(3) Configuring a standard IP access-list basing on nomenclature
a. Create a name-based standard IP access-list
Command Explanation
Global Mode
ip access-list standard <name>
no ip access-list standard <name>
Creates a standard IP
access-list based on
nomenclature; the “no ip
access-list standard
<name>“ command deletes the
name-based standard IP
access-list.
b. Specify multiple “permit” or “deny” rules
Command Explanation
Standard IP ACL Mode
[no] {deny | permit} {{ } |
any-source | {host-source }}
Creates a standard
name-based IP access rule; the
“no” form command deletes the
name-based standard IP
access rule.
c. Exit name-based standard IP ACL configuration mode