PLANET XGS3-24042 - Manual (Page 347)

40-13
10． Configure the Local Preference Value
Command Explanation
BGP configuration mode
bgp default local-preference
no bgp default local-preference
Change default local preference; the no bgp
default local-preference command
recovers the default value.
11． Enable sending default route
Command Explanation
BGP configuration mode
neighbor { | }
default-originate
no neighbor { | }
default-originate
Permit sending default route 0.0.0.0;
the no neighbor { |
} default-originate
command cancels sending default
route.
12． Configure BGP’s MED Value
（1） Configure MED value
Command Explanation
Route map configuration command
set metric
no set metric
Configure metric value; the no set metric
command recovers the default value.
（2） Apply route selection based on MED according to the path from different AS
Command Explanation
BGP configuration mode
bgp always-compare-med
no bgp always-compare-med
Permit the MED comparison from different
AS; the no bgp always-compare-med
command forbids the comparison.
13． Configure BGP routing redistribution
Command Explanation
BGP configuration mode
redistribute { connected | static | rip |
ospf} [metric ] [route-map
]
no redistribute { connected | static | rip
| ospf}
Redistribute IGP routes to BGP and may
specify the redistributed metric and route
reflector; the no redistribute { connected |
static | rip | ospf} command cancels the
redistribution.