PLANET XGS3-24042 - Manual (Page 445)

48-44
Command Explanation
Interface Configuration Mode
ip igmp access-group {<acl_num |
acl_name>}
no ip igmp access-group
Configure the filtering conditions of the interface
to IGMP group; the “no ip igmp access-group”
command cancels the filtering condition.
ip igmp join-group <A.B.C.D >
no ip igmp join-group <A.B.C.D >
Configure the interface to join in some IGMP
group, the “no ip igmp join-group <A.B.C.D >”
command cancels the join.
ip igmp static-group <A.B.C.D >
no ip igmp static-group <A.B.C.D>
Configure the interface to join in some IGMP
static group; the “no ip igmp static-group
<A.B.C.D >” command cancels the join.
（2）Configure IGMP Query parameters
1) Configure interval for IGMP to send query messages
2) Configure the maximum response time of IGMP query
3) Configure the time-out of IGMP query
Command Explanation
Interface Configuration Mode
ip igmp query-interval <time_val>
no ip igmp query-interval
Configure the interval of IGMP query messages
sent periodically; the “no ip igmp
query-interval” command restores default
value.
ip igmp query-max-response-time
<time_val>
no ip igmp
query-max-response-time
Configure the maximum response time of the
interface for IGMP query; the “no ip igmp
query-max-response-time” command restores
default value.
ip igmp query-timeout <time_val>
no ip igmp query-timeout
Configure the time-out of the interface for IGMP
query; the “no ip igmp query-timeout”
command restores default value.
（3）Config IGMP version
Command Explanation
Global Mode
ip igmp version <version>
no ip igmp version
Configure IGMP version on the interface; the “no
ip igmp version” command restores the default
value.
3. Disable IGMP Protocol
Command Explanation
Interface Configuration Mode