PLANET XGS3-24042 - Manual (Page 609)

68-2
68.2 ULSM Configuration Task List
1. Create ULSM group globally
2. Configure ULSM group
3. Show and debug the relating information of ULSM
1. Create ULSM group globally
Command explanation
Global mode
ulsm group
no ulsm group
Configure and delete ULSM group globally.
2. Configure ULSM group
Command explanation
Port mode
ulsm group {uplink |
downlink}
no ulsm group {uplink |
downlink}
Configure the uplink/downlink port of
ULSM group, the no command deletes the
uplink/downlink port.
3. Show and debug the relating information of ULSM
Command Explanation
Admin mode
show ulsm group [group-id]
Show the configuration information of
ULSM group.
debug ulsm event
no debug ulsm event
Show the event information of ULSM, the
no operation disables the shown
information.