PLANET XGS3-24042 - Manual (Page 47)

3-18
Telnet is enabled for configuring and managing the switch, username and password for authorized Telnet
users must be configured with the following command:
username privilege [password (0|7) ]
To open the local authentication style with the following command: authentication line web login local.
Privilege option must exist and just is 15. Assume an authorized user in the switch has a username of
“admin”, and password of “admin”, the configuration procedure should like the following:
Switch>enable
Switch#config
Switch(config)#username admin privilege 15 password 0 admin
Switch(config)#authentication line web login local
The Web login interface of XGS3-24042 is as below:
Figure 3-10 Web Login Interface
Input the right username and password, and then the main Web configuration interface is shown as below.