PLANET XGS3-24042 - Manual (Page 471)

49-15
absence of the interface in accordance with the
anycast-rp-addr. Configure on this router (as a
RP) the other-rp-addresses of other RP
communicating with it. This unicast address
identifies other RP and is used in the
communication with local routers. The effect of
other-rp-address refers to two respects:
1 Once this router (as a RP) receives the register
message from a DR unicast, it should forward it to
other RP in the network to notify all the RP in the
network of the source (S.G) state. While
forwarding, the router will change the destination
address of the register message into
other-rp-address.
2 Multiple other-rp-addresses can be configured in
accordance with one anycast-rp-addr, Once the
register message from a DR is received, it should
be forwarded to all of this RP one by one.
No operation will cancel other-rp-address
communicating with this router.
49.3.3 ANYCAST RP v6 Configuration Examples
Figure 49-3 The ANYCAST RP v6 function of a router
The following is the configuration steps:
Multicast Server
VLAN1:2000::100
VLAN1:2003::1
VLAN2:2001::2
VLAN2:2001::1
VLAN2:2004::2
VLAN1:2005::2
receiver receiver
receiver
RP2
RP1
DR
………