PLANET XGS3-24042 - Manual (Page 63)

4-9
3. Configure IP address of SNMP management base
4. Configure engine ID
5. Configure user
6. Configure group
7. Configure view
8. Configuring TRAP
9. Enable/Disable RMON
1. Enable or disable SNMP Agent server function
Command Explanation
Global Mode
snmp-server enabled
no snmp-server enabled
Enable the SNMP Agent function on the switch; the
no command disables the SNMP Agent function on
the switch.
2. Configure SNMP community string
Command Explanation
Global Mode
snmp-server community {ro|rw} <string>
[access {|}]
[ipv6-access
{|}] [read
] [write
]
no snmp-server community
[access {|}]
[ipv6-access
{|}]
Configure the community string for the switch; the no
command deletes the configured community string.
3. Configure IP address of SNMP management base
Command Explanation
Global Mode
snmp-server securityip { |
}
no snmp-server securityip { |
}
Configure the secure IPv4/IPv6 address which is
allowed to access the switch on the NMS; the no
command deletes configured secure address.
snmp-server securityip enable
snmp-server securityip disable
Enable or disable secure IP address check function
on the NMS.
4. Configure engine ID