PLANET XGS3-24042 - Manual (Page 100)

10-3
Global configuration mode
uldp aggressive-mode
no uldp aggressive-mode
Set the global working mode.
4. Configure aggressive mode on a port
Command Explanation
Port configuration mode
uldp aggressive-mode
no uldp aggressive-mode
Set the working mode of the port.
5. Configure the method to shut down unidirectional link
Command Explanation
Global configuration mode
uldp manual-shutdown
no uldp manual-shutdown
Configure the method to shut down
unidirectional link.
6. Configure the interval of Hello messages
Command Explanation
Global configuration mode
uldp hello-interval
no uldp hello-interval
Configure the interval of Hello messages,
ranging from 5 to 100 seconds. The value
is 10 seconds by default.
7. Configure the interval of Recovery
Command Explanation
Global configuration mode
uldp recovery-time
no uldp recovery-time
Configure the interval of Recovery reset,
ranging from 30 to 86400 seconds. The
value is 0 second by default.
8. Reset the port shut down by ULDP
Command Explanation
Global configuration mode or port
configuration mode
uldp reset
Reset all ports in global configuration
mode;
Rest the specified port in port
configuration mode.
9. Display and debug the relative information of ULDP