Epson WorkForce Pro WF-R8590 DTWF - Manual (Page 90)

& “Configuring Mail Server” on page 235
& “Managing Contacts” on page 59
& “Placing Originals” on page 55
& “Scan Mode” on page 26
& “Presets Mode” on page 42
& “Scanning Using Document Capture Pro (for Windows Only)” on page 91
Scanning to a Network Folder or FTP Server
You can save the scanned image to a specified folder on a network. You can specify the folder by entering a folder
path directly, but it may be easier if you register the folder information in the contacts list first.
Note:
Before you use this feature, make sure the printer's Date/Time and Time Difference settings are correct. Access the menus
from System Administration > Common Settings.
1. Place the originals.
2. Enter Scan from the home screen.
3. Select Network Folder/FTP.
4. Specify the folder.
❏ To select from the contacts list: Press Contacts, select a contact, and then press Proceed.
❏ To enter the folder path directly: Press Enter Location. Select Communication Mode, enter the folder path
as Location, and then make other folder settings.
Note:
Enter the folder path in the following format.
When using SMB as the communication mode:
\\host name\folder name
When using FTP as the communication mode:
ftp://host name/folder name
5. Press Format, and then select the file format.
6. Press Menu, and then make settings for File Settings and Basic Settings.
Note:
❏ When you select PDF as the file format, you can set a password to protect the file. Select PDF Settings, and then
make settings.
❏ Press Preset to save your settings as a preset.
7. Press the x button.
The scanned image is saved.
Related Information
& “System Administration” on page 32
& “Managing Contacts” on page 59
User's Guide
Scanning
90