Epson WorkForce Pro WF-R8590 DTWF - Manual (Page 202)

Interface RJ-11 Phone Line, RJ-11 Telephone set connection
* The specifications may differ by country or region.
Wi-Fi Specifications
Standards IEEE802.11b/g/n
Frequency Range 2.4 GHz
Maximum Radio-Frequency
Power Transmitted 17.5 dBm (EIRP)
Coordination Modes Infrastructure, Ad hoc *1 , Wi-Fi Direct *2 *3
Wireless Securities WEP (64/128bit), WPA2-PSK (AES) *4 , WPA2-Enterprise
*1 Not supported for IEEE 802.11n.
*2 Not supported for IEEE 802.11b.
*3 Simple AP mode is compatible with Ethernet connection. See the Network Guide for more details.
*4 Complies with WPA2 standards with support for WPA/WPA2 Personal.
Ethernet Specifications
Standards IEEE802.3i (10BASE-T)
IEEE802.3u (100BASE-TX)
IEEE802.3ab (1000BASE-T) *1
IEEE802.3az (Energy Efficient Ethernet) *2
Communication Mode Auto, 10Mbps Full duplex, 10Mbps Half duplex, 100Mbps Full duplex, 100Mbps
Half duplex
Connector RJ-45
*1 Use a category 5e or higher STP (Shielded twisted pair) cable to prevent risk of radio interference.
*2 The connected device should comply with IEEE802.3az standards.
Security Protocol
IEEE802.1X *
IPsec/IP Filtering
SSL/TLS HTTPS Server/Client
IPPS
SMTPS (STARTTLS, SSL/TLS)
SNMPv3
User's Guide
Appendix
202