Epson WorkForce Pro WF-R8590 DTWF - Manual (Page 39)

Menu Settings and Explanations
Basic Settings Fax Speed Select the fax transmission speed.
We recommend selecting Slow(9,600bps) when a communication error
occurs frequently, when sending/receiving a fax to/from abroad, or when you
are using an IP (VoIP) phone service.
ECM Automatically corrects errors in the fax transmission (Error Correction Mode),
mostly caused by telephone line noise. If this is disabled, you cannot send or
receive documents in color.
Dial Tone Detection Detects a dial tone before starting to dial.
If the printer is connected to a PBX (Private Branch Exchange) or digital phone
line, the printer may fail to start dialing. In this situation, change the Line
Type setting to PBX. If this does not work, disable this feature. However,
disabling this feature may drop the first digit of a fax number and send the
fax to the wrong number.
Dial Mode Select the type of phone system to which you have connected the printer.
When set to Pulse, you can temporarily switch the dialing mode from pulse
to tone by pressing ("T" is entered) while entering numbers on the fax top
screen. Depending on the region, this setting may not be displayed.
Line Type Select the line type to which you have connected the printer. For more
details, see the page that describes the settings for PBX.
Header Enter your sender name and fax number. These appear as a header on
outgoing faxes.
You can enter up to 40 characters for your name, and up to 20 digits for your
fax number.
Security Settings Direct Dialing
Restrictions Enable this to prevent fax numbers from being entered manually allowing
the operator to select recipients only from the contacts list or sent history.
Select Enter Twice to require the operator to enter the fax number again
when a number is entered manually.
Confirm Address
List Displays a recipient confirmation screen before starting the transmission.
Inbox Password
Settings Select to password protect the inbox to restrict users from viewing received
faxes.
Select Change to change the password, and select Reset to cancel password
protection. When changing or resetting the password, you need the current
password.
Backup Data Auto
Clear Fax documents deleted by using the control panel disappear from the LCD
screen, but their backups are temporarily stored in the memory. The
following features delete backups.
Backup Data Auto Clear: Automatically deletes backups each time a sent or
received document is deleted.
Clear Backup Data: Deletes all backups. Run this before you give the printer to
someone else or dispose of it.
Clear Backup Data
Check Fax
Connection Checks if the printer is connected to the phone line and ready for fax transmission, and prints the
check result on A4 size plain paper.
Fax Setting Wizard Select to make basic fax settings by following the on-screen instructions.
For more details, see the page that describes basic fax settings.
User's Guide
Printer Basics
39