Setting items for the postscript printer driver, Printing from smart devices, Using epson iprint – Epson WorkForce Pro WF-R8590 DTWF User Manual
Page 84: Installing epson iprint
Setting Items for the PostScript Printer Driver
Note:
The availability of these settings varies by model.
Color Mode
Select whether to print in color or in monochrome.
Press Simulation
You can select a CMYK ink color to simulate when you print by reproducing the CMYK ink
color of the offset press.
Simulation Method
Select the method of color conversion for the CMYK simulation.
Pure Black Mode
Select whether or not to print black text data or line drawing data using only black ink.
However, other color inks may be consumed depending on the paper, even when this
feature is set.
Ink Save Mode
Conserves ink by reducing the print density.
Rotate by 180º
Rotates the data 180 degrees before printing.
Printing from Smart Devices
Using Epson iPrint
Epson iPrint is an application that allows you to print photos, documents, and web pages from a smart device such
as a smartphone or tablet. You can use local print, printing from a smart device that is connected to the same
wireless network as your printer, or remote print, printing from a remote location over the Internet. To use remote
print, register your printer in the Epson Connect service.
Related Information
&
“Epson Connect Service” on page 151
Installing Epson iPrint
You can install Epson iPrint on your smart device from the following URL or QR code.
User's Guide
Printing
84