Epson WorkForce Pro WF-R8590 DTWF - Manual (Page 225)

Installing the Optional Units
Optional Cabinet Code
The following is the code for the optional cabinet.
For worldwide users: Optional Cabinet (C12C847261)
For users in India: Optional Cabinet (C12C932551)
Installing the Optional Cabinet
The cabinet can be attached to the printer and the optional paper cassette units.
! Caution:
❏ Make sure you turn off the printer, unplug the power cord from the printer, and disconnect any cables before
starting installation. Otherwise, the power cord may be damaged resulting in fire or electric shock.
❏ Lock the casters of the cabinet before starting installation. If the cabinet moves unexpectedly, you may be injured.
❏ When lifting the printer, place your hands in the positions shown below. If you lift the printer holding other
positions, the printer may fall or you may trap your fingers when placing the printer.
1. Turn off the printer by pressing the P button, and then unplug the power cord.
2. Disconnect any connected cables.
Note:
If optional paper cassette units have been installed, uninstall them as well.
3. Remove the cabinet from the box, and then remove any protective materials.
User's Guide
Appendix
225