Epson WorkForce Pro WF-R8590 DTWF - Manual (Page 50)

3. Load paper at the center of the rear paper feed with the printable side facing up.
c
Important:
❏ Do not load more than the maximum number of sheets specified for the paper. For plain paper, do not load
above the line just under the d symbol inside the edge guide.
❏ Load paper short edge first. However, when you have set the long edge as the width of the user defined size,
load paper long edge first.
4. Slide the edge guides to the edges of the paper.
5. On the control panel, set the size and type of the paper you loaded in the rear paper feed.
6. Slide out the output tray.
User's Guide
Loading Paper
50