Epson 440 - Manual (Page 84)

EPSON Stylus Color 440/640/740 Revision A
Chapter 3 Troubleshooting 84
Table 3-3. Printer Condition and Panel Status
Error Status
Indicators
Recovery
Power
Ink out
(Black) Ink Out
(Color)
Paper Out
Paper Out --- --- --- On
Load paper by pressing the load/eject
button.
Paper jam condition --- Off Off Blink
Eliminate a paper then press the load/eject
button.
No Ink cartridge or
Ink end (black)
--- On --- ---
Install a new black ink cartridge by pressing
the load/eject button for 3 seconds.
No Ink cartridge or
Ink end (color)
--- --- On ---
Install a new color ink cartridge by pressing
the load/eject button for 3 seconds.
Maintenance
request
Blink Blink Blink Blink
Change the waste ink drain tank and reset
the EEPROM.
Fatal error Blink On On Blink
Turn the printer off and on again. If the
printer does not recover, repair the
appropriate part.